Skip to the content

Nitrotherm spray bodyshop equipment logo

Save at least 20% on your paint costs!

When you run an auto body shop or collision repair centre, you have to meet demands for high-quality finishes at a cost-effective outlay. Equipment needs to justify its expense and be economical and aid productive working. This is where Nitrotherm Spray can revolutionise your business. It could be what drives your business to become the leading body shop in the area.

Ionised Nitrogen for a better finish.

Nitrotherm Spray works by using nitrogen instead of compressed air. Heated and ionised nitrogen giving better adhesion and finish to the paint film, and the usual paint runs, sagging, drips and the orange peel effect are gone. 

It also means you can reduce your spraying pressure; as a result, it creates:

Less turbulence.

  • Reducing the presence of dirt and dust in the finished coating.

Less polishing needed.

  • Thanks to an improved finish.

Greater yields.

  • Through less wastage, your paint will go further.

Saves your business.

  • At least 20-30% on coating materials.

Significantly reduced overspray. 

  • To reduce maintenance time for your booths and booth filters.

Reduced contaminants.

  • With less overspray, solvent use is cut, helping to aid your environmental targets.

Quicker production.

  • Saving up to a 50% reduction in application time

 

If you're an established business looking to add some new equipment or a new company looking to make your vision a little more affordable, we are able to help with finance options. 

CLICK HERE TO LEARN MORE.

 

ABOUT TODD ENGINEERING.

The UK's leading paint spray booth manufacturers, Todd Engineering ltd were founded by the Todd family in the early nineties.

The company's factory is located in Staffordshire, on the edge of the industrial midlands, close to many suppliers. A skilled workforce undertakes design and manufactures all the spray booths, many of whom have started with the company in an apprenticeship.

Todd Engineering is proud of its wide range of high-quality spray booths for sale and its ovens and Bodyshop equipment. Their efficient in-house installation, service, and customer care teams have all contribute to high customer satisfaction and the company's rapid growth over the last 30 years.

Todd Engineering manufactures all its spray booths in-house; they supply a wide variety of booths and equipment. They offer a range from the Olympian 1000 series spray booth, which suits independent bodyshops and businesses, to the Titan CV series, a commercial spray booth with industrial spray booth equipment.

Todd Engineering has been praised for treating each customer as an individual; they pride themselves in offering a bespoke service to ensure they deliver equipment to suit the customer's business needs.

Using the latest in spray booth technology, Todd offers an energy-efficient solution on many of their products to save you money and time.

 

Todd Engineering has formed a new partnership with Italian based Eurosider.

Todd Engineering has had success over the last couple of years with their partnership with Greentech Dryers, offering their customers a cost-effective solution to productivity and energy-saving within their spray booths.

Now Todd’s has also joined forces with Eurosider to offer their highly innovative product, the Nitrotherm Spray System.

What is Nitrotherm?

EUROSIDER®s patented NITROTHERM® SPRAY system is a revolution in coating application technology.
By introducing fundamental principles and application control, unavailable with normal compressed air, NITROTHERM® SPRAY gives users unprecedented control over the coating process.


Using the principle of selective permeation, NITROTHERM® SPRAY concentrates nitrogen contained in compressed air for use as the fluid carrier. Fluid temperature control and ionising further enhance the inherent performance advantages of nitrogen. Nitrogen is inert and anhydrous and NITROTHERM® SPRAY, with its fluid carrier temperature control, enables constant humidity and temperature values: two previously uncontrolled variables. Application conditions can therefore be controlled and consistent all day and in all seasons.

Through better adhesion, there’s also reduced overspray for less costly wastage and maintenance costs. Plus, the knock-on effect is reduced solvent use to enhance your green credentials.
Nitrotherm Spray lays flatter and takes fewer coats. Great news for your bottom line because it reduces application time by up to 50% and saves you at least 20% in paint costs. Another benefit from Nitrotherm is perfectly controlled flows in coating spray. It allows no change in viscosity, bringing outstanding control in all seasons or climatic conditions, eliminating the need for any humidity and temperature control systems.

 

Why integrate Nitrotherm Spray into your existing paint line?

There is no better way to improve your productivity, reduce costs, lower emissions and deliver consistent, high-quality finishes for all your demanding applications. The advanced patented Nitrotherm is revolutionising the way many industries professionally apply coatings, where surface applications are required.

CONTACT US

Get in touch with your enquiries today