Skip to the content

Nitrotherm Spray eco friendly equipment

Reduce paint costs. Plus, with better finishing.

Nitrotherm Spray system is an innovation that is changing spraying within the aerospace, simulation and defence for the better. It increases paint yields to reduce the costs of painting and coating but allows for a better quality of finish.

Nitrotherm Spray is a superior method to traditional spraying that also saves costs. Replacing compressed air with ionised nitrogen for the fluid carrier, Nitrothem Spray provides a better, faster application and finishing.

Flatter finish.

Due to spraying at reduced pressure, Nitrotherm creates less turbulence. This reduces the number of dust and dirt particles reaching the paint to give you a higher quality finish with no polishing required (providing another cost advantage).

Nitrotherm Spray allows paint and coatings to be applied thinly, wet-on-wet. This eliminates those common paint issues found in traditional methods such as running, sags, drips and the orange peel effect.

Coats can be applied in thin layers – for less airborne weight.

A significant advantage of the Nitrotherm Spray method is the ability to spray in thin layers. This creates less weight and drags on aeroplane parts in flight which consequently translates into a significant saving in reduced fuel usage.

Save at least 20% on your paint costs.

Nitrotherm Spray produces less overspray with superior adhesion, so that means less wastage and cleaning maintenance time for your booths and booth filters. Together with more rapid drying, it speeds up production with a significant advantage of the Nitrotherm Spray.

  • 50% reduction in application time
  • reducing the presence of dirt and dust in the finished coating
  • greater throughput
  • increased paint yields
  • saving of up to 20% in paint material costs


Consistent finishing with no climate control needed.

In addition, it allows paint viscosity to be the same regardless of fluctuations in humidity, temperature or climatic conditions. This ensures your production outputs at a consistently high-quality standard.

If you're an established business looking to add some new equipment or a new company looking to make your vision a little more affordable, we are able to help with finance options. 




The UK's leading paint spray booth manufacturers, Todd Engineering ltd were founded by the Todd family in the early nineties.

The company's factory is located in Staffordshire, on the edge of the industrial midlands, close to many suppliers. A skilled workforce undertakes design and manufactures all the spray booths, many of whom have started with the company in an apprenticeship.

Todd Engineering is proud of its wide range of high-quality spray booths for sale and its ovens and Bodyshop equipment. Their efficient in-house installation, service, and customer care teams have all contribute to high customer satisfaction and the company's rapid growth over the last 30 years.

Todd Engineering manufactures all its spray booths in-house; they supply a wide variety of booths and equipment. They offer a range from the Olympian 1000 series spray booth, which suits independent bodyshops and businesses, to the Titan CV series, a commercial spray booth with industrial spray booth equipment.

Todd Engineering has been praised for treating each customer as an individual; they pride themselves in offering a bespoke service to ensure they deliver equipment to suit the customer's business needs.

Using the latest in spray booth technology, Todd offers an energy-efficient solution on many of their products to save you money and time.


Todd Engineering has formed a new partnership with Italian based Eurosider.

Todd Engineering has had success over the last couple of years with their partnership with Greentech Dryers, offering their customers a cost-effective solution to productivity and energy-saving within their spray booths.

Now Todd’s has also joined forces with Eurosider to offer their highly innovative product, the Nitrotherm Spray System.

What is Nitrotherm?

EUROSIDER®s patented NITROTHERM® SPRAY system is a revolution in coating application technology.
By introducing fundamental principles and application control, unavailable with normal compressed air, NITROTHERM® SPRAY gives users unprecedented control over the coating process.

Using the principle of selective permeation, NITROTHERM® SPRAY concentrates nitrogen contained in compressed air for use as the fluid carrier. Fluid temperature control and ionising further enhance the inherent performance advantages of nitrogen. Nitrogen is inert and anhydrous and NITROTHERM® SPRAY, with its fluid carrier temperature control, enables constant humidity and temperature values: two previously uncontrolled variables. Application conditions can therefore be controlled and consistent all day and in all seasons.

Through better adhesion, there’s also reduced overspray for less costly wastage and maintenance costs. Plus, the knock-on effect is reduced solvent use to enhance your green credentials.
Nitrotherm Spray lays flatter and takes fewer coats. Great news for your bottom line because it reduces application time by up to 50% and saves you at least 20% in paint costs. Another benefit from Nitrotherm is perfectly controlled flows in coating spray. It allows no change in viscosity, bringing outstanding control in all seasons or climatic conditions, eliminating the need for any humidity and temperature control systems.


Why integrate Nitrotherm Spray into your existing paint line?

There is no better way to improve your productivity, reduce costs, lower emissions and deliver consistent, high-quality finishes for all your demanding applications. The advanced patented Nitrotherm is revolutionising the way many industries professionally apply coatings, where surface applications are required.


Get in touch with your enquiries today